EZ-Bend®室内和室外电缆解决方案

采用EZ-Bend加固电缆, 用户扩展了MDU的选项, 在家里布线和侵略性, 空间受限的路由环境. 当需要低调和耐用时，选择3.0毫米产品. 对于要求更高的部署，EZ-Bend 4.8加固电缆是理想的. EZ-Bend加固电缆s are purposefully designed for installations indoor, 室外和室内立管. These cables can be routed around sharp corners 和 stapled using traditional fast 和 easy installation practices, 信号损失可以忽略不计, 并备有一整套终端设备, 适用于任何类型的建筑和生活单元的模块和电缆.

EZ-Bend加固电缆

EZ-BEnd光纤电缆
EZ-Bend电缆
  • EZ-Bend G.657.B3带2接口光纤.5mm弯曲半径-是行业标准的两倍.
  • 向后兼容G.652.D纤维,
  • offered as factory-connectorized 和 tested assemblies or Reel-in-the-Box,
  • 3.0毫米或4毫米.直径8mm坚固耐用的绳索，包括可调选项;
  • 100磅拉力，由芳纶强度构件实现
  • 额定用于室内配电，室外包括地下和立管;
  • 可以用拉链、订书钉或夹子固定，
  • plenum 和 dual-rated low-smoke zero-halogen (LSZH) construction with fire ratings including UL, 全会和欧洲CPR(建筑产品法规)认证

EZ-Bend加固电缆适用于 以下应用:

  • 减少电缆:地下电缆选择包括单光纤EZ-Bend 3.0 mm和4.8mm加固电缆和ez弯曲可调电缆. The toneable cables enable easy above ground locating of buried cables to help avoid cable cuts when other underground systems are installed. These drop cables are installed from the aerial terminal down the pole to the ground, 然后将其掩埋，以尽量减少对景观的破坏, 或者拉进现有的管道. The cable is then connected into a demarcation box installed at the side of the house, 理想的是在靠近光网络终端(ONT)的位置
  • 多纤滴束: 多纤滴束 provide the added benefit of saving time in installation by pulling 5, 一次组装6或12个组件. 这些多纤维滴束具有坚固耐用的4.8mm室内外电缆，布放于建筑物外侧. The coils are located at each of the windows of the living unit where each individual end connectorized end will enter the living unit through the window seal connecting to the ONT. The un-connectorized end of the bundle is spliced into a Fiber Distribution Terminal (FDT), 位于地面或建筑物顶部的.
  • 坚固的组件或绳索: The EZ-Bend加固组件 are factory connectorized cables designed to withst和 stapling while exhibiting negligible bend loss to help save time 和 money on installation. The innovative design conquers sharp corners without the need for bend management 和 is ideal for MDU indoor 和 outdoor drops to connect to the ONT inside the living unit, 或用于家庭或商业建筑的电缆敷设. 另一方面, EZ-Bend加固电缆s are also available for bulk purchase as Reel-in-the-Box when installers prefer to cut custom lengths using fusion splicing for in-field splicing or mechanical connectors.

EZ-Bend常见问题

1. What are the benefits of using specially designed bend-insensitive fiber cable to 和 into the dwelling unit or office?

许多因素会造成光纤损耗. 其中一个主要因素是弯道过紧.  光纤弯曲到一定半径以下时, light in the core is no longer guided in the core of the fiber creating loss which can slow internet speeds 和 streaming applications or shut down service completely.

EZ-Bend在业内具有最低的紧密弯曲损失性能.

2. 为什么光纤的弯曲灵敏度是今天关注的问题?

随着光纤到户(FTTH)的出现, 例如，今天的纤维被安装在新的通路上, around doorframes 和 wall studs – where they are being bent 和 stapled like copper by installers, 有些人以前没有吃纤维的经验. New applications use advanced adhesives to attach fiber 和 route it around corners.

EZ-Bend may be stapled 和 bent around sharp corners twice as tight as competitor fibers, down to 2.弯曲半径5mm.

3. What are some of the typical bend stresses an installer needs to be aware of?

导致信号丢失的一些应力诱发因素包括:

  • 在尖角处装订
  • 拉
  • 通过管道的拉杆和拉拔
  • 推
  • 直接埋地安装

如果安装得当，EZ- Bend可以减少这些损失.

4. 是否有可以使紧弯损耗最小化的光纤?

是的，ez -弯曲光纤. A special OFS实验室 patented fiber core design greatly improves the bending performance of EZ-Bend 光纤 when it experiences bends either during or after installation.

5. What bend-insensitive fiber optic cables are specially designed for residential use?

一旦纤维进入到家里，进入到住宅, 客户通常会指定条款, 而且弯曲病可能变得无法控制.  Conforming the optical cable around tight corners around the base of a home, 在家里, or in an apartment without using expensive unsightly bend management is strongly preferred by customers, 并且安装人员更容易部署. 对于这些应用程序, OFS提供EZ-Bend加固电缆和电缆组件, 以及用于内部生活单元部署的InvisiLight®光学解决方案. All the EZ-Bend Cabling solutions 和 InvisiLight 解决方案 use EZ-Bend 光纤, 哪一个优于并符合ITU-T - G.657.B3推荐. EZ-Bend 光纤 provides ultra-bend insensitivity where it is needed (typically wrapping homes, 在家里, 或在大规模FTTH部署的公寓中). 这些电缆可以绕着走廊上的许多尖角走, 在窗户和门框周围, 以及其他有大量急转弯的路径. The cables may be secured by stapling or in the case of InvisiLight Solution using specially designed adhesives.

EZ-Bend®单模光纤手册

6. What are the benefits of using specially designed bend-insensitive fiber cable to 和 into the dwelling unit or office?

OFS EZ-Bend加固电缆 和 Cable assemblies provide a differentiated solution for any communication services provider seeking to connect subscribers 在家里 和 MDUs.

福利包括:

  • Easy low-skill installation of optical fiber from the curb to 和 into the home to the indoor ONT.
  • More economical to use per home compared to micro-duct systems 和 indoor moldings.
  • Can save additional money: No need to transition enclosure from outside to inside.
  • Improved Wi-Fi coverage: Easily transitioned to InvisiLight Fiber inside the cable to reach inside the living unit to the optimum placement of the ONT/Wi-Fi Router.
  • Maybe stapled 和 bent around sharp corners twice as tight as the best competition, down to 2.弯曲半径5mm.
  • 与竞争对手的G相比，业内最佳的弯曲损失性能.657B光纤电缆.
  • Reliable performance based on over 4M living units (和 some businesses) connected since 2009 by 6 Tier 1 service providers, 几十个二级和三级

The EZ-Bend加固电缆 和 Cable Assembly Video below is a comprehensive Installation Guide.

EZ_Bend安装视频

OFS can also provide live virtual training on all aspects of EZ-Bend 和 InvisiLight 解决方案!

7. 那融合拼接弯曲不敏感纤维呢?

OFS can also provide live virtual training on all aspects of EZ-Bend 和 InvisiLight 解决方案!

8. 目前谁在使用EZ-Bend电缆和InvisiLight解决方案?

Multiple Tier 1 Communications Services Providers in North America 和 Europe have deployed EZ-Bend cabling 和 InvisiLight 解决方案 to Millions of subscribers since the launch of EZ-Bend cabling in 2009.

下载及参考资料

    案例研究

    InvisiLight®的解决方案
    EZ-Bend®电缆
    SlimBox®机箱和模块
    电缆室内/室外

    知识库

    Our scientists 和 engineers create the products 和 solutions that become industry st和ards. 我们在我们的网站上公布他们的结果和最重要的出版物.知识库电子书

     

    They discuss a wide variety of topics ranging from our suggested solutions to technical problems to breakthroughs in numerous products.

     

    浏览我们的知识库